Call: 937-667-8484
Email: sales@captorcorp.com
EMI & EMC Solutions > HEMP Filters Power Line > Power Line HEMP Filters Legacy > HEMP/EMP Filter # A-8292  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

HEMP/EMP Filter # A-8292, Power Line HEMP Filters Legacy



  • Voltage : 0 to 480 Volts
  • Current : 0 to 100 Amps
  • Frequency : DC to 400 Hz
  • Insertion Loss : 100 dB minimum from 14 kHz to 10 GHz
  • Operating Temperature : -40 ºC to +71 ºC
  • Storage Temperature : -55 ºC to +105 ºC
  • Altitude : Maximum of 15,000 feet
  • Humidity : 10 to 90 Percent
  • Fungus : Non-nutritive materials are used
  • Corrosion : Hermetically sealed steel or aluminum enclosures with tin-lead plating





Specifications  · Electrical Ratings  · PCI - HEMP Parameters  · Attributes/Options

Specifications

Voltage

0 to 480 V

Operating Temperature

-40 to +71 ºC

Storage Temperature

-55 to +105 ºC

Maximum Altitude

15000 ft

Humidity

10 to 90 %

Fungus

Non-nutritive materials are used

Corrosion

Hermetically sealed steel or aluminum enclosures with tin-lead plating

Note

Full load from 100 KHz to 20 MHz.
When tested with external V130LA20B MOV connected from each line to ground.


Electrical Ratings

Voltage (Vrms)

125

Voltage (Peak)

177

Current

5 A

Frequency

DC to 60 Hertz

DCR

≤ 0.5 Ω

DWV (DC)

600 V

MIL-STD-220 Insertion Loss (Limit)

100 dB Minimum from 14 kHz through 10 GHz


PCI - HEMP Parameters

Type

Short Pulse

Type of Injection

Common Mode
Wire-to-ground

Common Mode Peak Short- Circuit Current

2500 A

Wire-to-ground Peak Short- Circuit Current

2500 A

Common Mode Source Impedance

≥ 60 Ω

Wire-to-ground Source Impedance

≥ 60 Ω

Wire-to-ground Load Impedance

2 Ω

Common Mode Residual Peak Current

≤ 1.0 A

Wire-to-ground Residual Peak Current

≤ 1.0 A


Attributes/Options
  • Meet or exceed the MIL-STD-188-125-1 requirements
  • Inductive Input
  • Choice of Termination Configurations
    • Quick Disconnect Terminal Tabs
    • Threaded Studs
    • Connectors
  • Can be supplied with HEMP Protection Modules
  • Supplied with Certified PCI data upon request
  • Existing Designs for:
    • Other Power Lines (Intersite)
    • Audio/Data Lines (Intersite)
    • Control/Signal Lines (Intersite)
  • Existing Applications include:
    • AC/DC power
    • Telephone Lines
    • Analog Fire Alarms
    • Servo Motors
    • Synchro Transmitter
  • Custom tailoring for your unique application



  • Site created by Thomas Web Solutions and powered by Navigator PlatformPrivacy  |  Sitemap  |  Catalog Index
    Copyright © 2017 Captor Corporation, All Rights Reserved