Call: 937-667-8484
Email: sales@captorcorp.com
EMI & EMC Solutions > Tempest Filters > Tempest Filters > Tempest Filter # A-8948  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Tempest Filter # A-8948, 15.0 Amp Standard Model Tempest Filters



  • Compact, space-saving configurations offering high power performance
  • Superior isolation achieved by utilizing Captor feedthru capacitors
  • Demanding Tempest Requirements? STOP YOUR SEARCH and contact Captor
  • Voltage Rating : 120/230 VAC @ 60 Hz
  • Visual/Mechanical : Per MIL-F-15733, paragraph 4.6.1
  • Capacitance : Per Mil-STD-202, Method 305 @ 1 kHz
  • Insulation Resistance : 1500 M Ω minimum per MIL-STD-202, Method 302 (prior to installation of bleeder resistors)
  • Dielectric Withstanding Voltage : 1000 VDC line-to-line & line-to-chassis per MIL-STD-202, Method 301
  • Insertion Loss : Per MIL-STD 220
  • Voltage Drop : Less than 1% of rated voltage per paragraph 4.6.8 of MIL-F-15733
  • Terminal Strength : Per MIL-STD-202, Method 211
  • Leakage Current : 5 mA maximum, measured per UL standard 1283 at 120 VAC, 60 Hz
  • Voltage Discharge : Unit shall discharge to less than 30 VDC after removal or power
  • Operating Temperature : -55 ºC to +71 ºC

    Can't Find the Correct part for your Specific Application?

    Let us design the exact solution to solve your problem. Our solutions are more cost effective than some of our competitors "catalog" items.
    • Higher Operating Frequency
    • Higher Voltage and Current Ratings
    • Custom chassis designs
    • Custom terminations
    • Application specific testing available upon request
    • Custom Spec Sheets





  • Specifications  · Insertion Loss Curve

    Specifications

    Voltage Rating

    120/230 VAC @ 60 Hz

    Visual/Mechanical

    Per MIL-F-15733, Paragraph 4.6.1

    Capacitance

    Per MIL-STD-202, Method 305 @ 1 kHz

    Insulation Resistance

    1500 MΩ minimum per MIL-STD-202, Method 302 (prior to installation of bleeder resistors)

    Dielectric Withstanding Voltage

    1000 VDC line-to-line & line-to-chassis per MIL-STD-202, Method 301

    Insertion Loss

    Per MIL-STD 220

    Voltage Drop

    Less than 1% of rated voltage per paragraph 4.6.8 of MIL-F-15733

    Terminal Strength

    Per MIL-STD-202, method 211

    Leakage Current

    5 mA maximum, measured per UL standard 1283 at 120 VAC, 60 Hz

    Voltage Discharge

    Unit shall discharge to less than 30 VDC after removal or power

    Operating Temperature

    -55 to +71 ºC

    Fig.

    Current Rating

    15.0 A

    Dimension A

    6.00 in

    Dimension B

    6.00 in

    Dimension C

    3.00 in

    Input Connection

    IEC

    Output Connection

    8-32UNC-2A Terms


    Insertion Loss Curve

    Insertion Loss Curve



     DOWNLOADS 

    Datasheet
    (PDF, 382KB)


    Site created by Thomas Web Solutions and powered by Navigator PlatformPrivacy  |  Sitemap  |  Catalog Index
    Copyright © 2017 Captor Corporation, All Rights Reserved