• Control/Signal Line HEMP Filters Standard/High Performance

    • Voltage Rating : 48 VDC or 120 VAC @ 0-60 Hz
    • Visual/Mechanical : Per MIL-PRF-15733, paragraph 4.6.1
    • Capacitance : Per MIL-STD-202, Method 305 @ 1 kHz
    • Insulation Resistance : Per MIL-PRF-15733, paragraph 4.6.7 with Hemp Protection Module removed.
    • Dielectric Withstanding Voltage : Per MIL-PRF-15733, paragraph 4.6.5 with Hemp Protection Module removed.
    • Standard Insertion Loss : Per MIL-STD-220, 20 dB @ 10 kHz, 80 dB @ 10 MHz to 10 GHz
    • Terminal Strength : Per MIL-PRF-15733, paragraph 4.6.11
    • Voltage Discharge : Discharge to less than 30 Volts within 2 seconds after removal of power
    • Terminals : 1/4" Quick Connect Tab
    • Operating Temperature : -55 ºC to +71 ºC
    • Storage Temperature : -55 ºC to +105 ºC
    • Chassis & Terminal Finish : Electro Tin-Lead
    • Chassis Material : 20 GA. Cold Rolled Steel

  • Control/Signal Line HEMP Filters Standard/High Performance

    • Voltage Rating : 48 VDC or 120 VAC @ 0-60 Hz
    • Visual/Mechanical : Per MIL-PRF-15733, paragraph 4.6.1
    • Capacitance : Per MIL-STD-202, Method 305 @ 1 kHz
    • Insulation Resistance : Per MIL-PRF-15733, paragraph 4.6.7 with HEMP Protection Module removed.
    • Dielectric Withstanding Voltage : Per MIL-PRF-15733, paragraph 4.6.5 with HEMP Protection Module removed.
    • High Performance Insertion Loss: Per MIL-STD-220, 100 dB @ 14 kHz - 10 GHz
    • Terminal Strength : Per MIL-PRF-15733, paragraph 4.6.11
    • Voltage Discharge : Discharge to less than 30 Volts within 2 seconds after removal of power
    • Terminals : 1/4" Quick Connect Tab
    • Operating Temperature : -55 ºC to +71 ºC
    • Storage Temperature : -55 ºC to +105 ºC
    • Chassis & Terminal Finish : Electro Tin-Lead
    • Chassis Material : 20 GA. Cold Rolled Steel

  • NEMA Cabinets for Multiple HEMP Filters

    Signal Line NEMA Cabinets