Specifications
Brands |
Captor |
Voltage Rating (AC) |
277 V480 V |
Frequency |
60 Hz |
Current |
30 A |
Insertion Loss Curve |
 Curve 1, Standard Performance Minimum Insertion Loss |
Number of Circuits |
3 |
Estimated Weight |
115 lb |
High Altitude Electromagnetic Pulse (HEMP) Compliance |
Per MIL-STD-188-125-1 and MIL-STD-188-125-2 as Power Line (Intrasite) Point of Entry Filter for Short (E1) and Intermediate (E2) Pulses. |
Minimum Insertion Loss |
20 dB @ 10 kHz 40 dB @ 100 kHz 60 dB @ 1 MHz 80 dB @ 10 MHz to 10 GHz |
Leakage Current |
< 10% of Rated Current 10 through 150 Amperes, < 1 Amp for 5 Amp Filters |
Insulation Resistance |
Per MIL-PRF-15733, prior to discharge resistor installation. |
Dielectric Withstanding Voltage |
2250 VDC Line-to-Chassis Per MIL-STD-202, Method 301 Prior to Surge Arrestor and Discharge Resistor Installation |
Voltage Drop |
Less than 1% of rated voltage per paragraph 4.6.8 of MIL-PRF-15733 |
Voltage Discharge |
Discharge to Less than 30 Volts within 30 s After Removal of Power |
Operating Temperature |
-40 to +65 °C |
Storage Temperature |
-55 to +105 °C |
Compliance |
MIL-STD-188-125-1 MIL-STD-188-125-2 |
