CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information
100dB, 14KHz to 1 GHz measured per MIL-STD-220, 50ohms system 10 to 100% load current
Unit of Measure

Specifications

Brands

 N/A Captor

Alternating Current (AC) Voltage at 60 Hertz (Hz)

N/A 270 V480 V

Insulation Resistance

 N/A Per MIL-PRF-15733, prior to discharge resistor installation.

Dielectric Withstanding Voltage

 N/A 2250 VDC line-to-chassis per MIL-STD-202, Method 301 prior to installation of discharge resistor

Voltage Drop

 N/A Less than 1% of rated voltage per paragraph 4.6.8 of MIL-PRF-15733

Voltage Discharge

 N/A Discharge to less than 30 Volts within 30s after removal of power

Operating Temperature

 N/A -40 to +65 ºC

Storage Temperature

 N/A -55 to +105 ºC

Insertion Loss

 N/A Measured per MIL-STD-220

Filter Type

 N/A High Performance Filter

Number of Lines

 N/A 3

Current Rating

 N/A 800 A

Estimated Weight

 N/A 2750 lb

Size

Size A

 N/A 1 x 25.0 in1 x 50.0 in

Size B

 N/A 60.0 in

Size C

 N/A 12.0 in

Size D

 N/A 40.0 in

Size E

 N/A 1 x 27.0 in1 x 52.0 in

Enclosure

Enclosure

 N/A
  • Modified: NEMA 1 type enclosure
  • Cabinet Material: Stainless Steel construction
  • Filter insert case material: Cold rolled steel construction with a corrosion resistant plating
  • Epoxy paint optional
  • Shielding effectiveness measured on clean side greater than 100 dB from 14 KHz or 100 KHz to 10 GHz
  • Dual removable access covers

Note

Note

 N/A One A-11035-4 cabinet (two 400 A filter lines connected in parallel for each phase) and one A-11035-2 cabinet (two 400 A filter lines connected in parallel for each phase) for a total of three 800 A lines.
When installed with best grounding practice, additional shielding and Isolation between input and output compartments
Specifications subject to change
Cabinet Supplied with Filter Inserts, 50 to 800 Amps 2, 3 and 4 Power Line filters Installed